How to apply ?

 

All  peter aloisson applications besides "the buttons" come already with a prefixed double sided adhesive tape.
You can simply apply your application/s yourself.

 

• Clean the area to which you wish to apply your peter aloisson product with a grease and lint free cloth.
• Check the position of your application before applying it. Please make sure that the peter aloisson logo is at the correct 12 o clock position (bezels) all other applications  – as seen on our website.
• Remove the protective foil
• Position the application
• Use brief pressure for about 1 minute.
• Please be patient! Your application will be securely glued after only an hour – but please allow the adhesive 24 hours to set completely.
  

 

Buttons do not come with a prefixed double sided adhesive tape. Our experience shows that due the elasticity of the tape it is sometimes difficult to position your buttons in the exact way. Therefore please use a common glue (no super glue) to apply.

 

• Clean the area to which you wish to apply your peter aloisson button with a grease and lint free cloth.
• Check the position of the button before applying it.
• Apply a tiny drop of glue to the area where you want to apply the button (do not use too much and do not apply the glue on to the button itself)
• Position the button
• Check that the button is in the correct position – or if needed – readjust the button.
• Leave it – and wait for the time indicated on your glue description.